1. When unloading and handling the gantry crane after arriving at the station, special attention should be paid to avoid accidents such as collision, bending and torsion. For this purpose, the following provisions shall be observed: A. When hoisting, there should be at least two hoisting points, ...

The actual technical specifications for the technical practical operation of gantry cranes are as follows: 1. Only those who have passed the examination and have a machine and equipment operation certificate are allowed to carry out practical operations. Operators must strictly implement relevant...

Lifting machinery is divided into four categories, namely light and small lifting equipment, bridge cranes, cantilever cranes, and stacking cranes. The most used of these four types is the bridge crane. In fact, there are many types of bridge cranes. There are corresponding bridge cranes for diff...

Some customers always encounter a decoupling situation during the lifting of heavy objects. And what is the reason for this? Next, I will reveal to you why the chain hoist always decouples: 1. Suspension point problem: The hanging heavy object does not put the heavy object in the middle of the ho...

In the past, labor has been used to move goods, which is not only inefficient, but also wastes a lot of time and requires a lot of labor. The production development of lifting equipment reduces labor, improves efficiency, and reduces costs to a certain extent. In recent years, with the continuous...

Filter type dust collector refers to the equipment that realizes gas-solid separation when dust particles in the airflow are intercepted and captured by the filter layer when the dust-containing smoke holes pass through the filter layer. Filter type dust collectors include bag type dust collector...

Exhaust gas purification towers generally include acid mist exhaust gas purification tower, FRP exhaust gas purification tower, biological exhaust gas purification tower, PP spray exhaust gas purification tower, etc. Flue gas purification mainly refers to the treatment of industrial waste gas gen...

Time:2021.12.01-12.04 Venue:Jakarta Convention Center, Indonesia ADD.:Jl. Gatot Subroto, RT.1/RW.3, Gelora, Tanahabang, Kota Jakarta Pusat, Daerah Khusus Ibukota Jakarta 10270, Indonesia Range of exhibition Tools: hand tools and power tools, hardware tool cutting tools, metal forming tools, grind...

TIME:2022.03.08-03.11 Venue: Melbourne Convention and Exhibition Centre, Australia Add.:2 Clarendon Street,Southbank,Melbourne, Victoria,Australia, 3205,Australia Exhibition introduction: Australia Melbourne Industrial Machinery Manufacturing Exhibition (National Manufacturing Week: NMW) is Austr...

Natural wind enters from two directions. One direction enters from the air inlet on the top of the cooling tower, passes through the cooler and enters the air duct, and the other direction enters from the air inlet grille and enters the air duct through the pre-cooling filler. The wind from all d...