Industry Dust treatment environment friendly

Posted on Sun, 12 Sep 2021 04:16:24 +0000

Filter type dust collector refers to the equipment that realizes gas-solid separation when dust particles in the airflow are intercepted and captured by the filter layer when the dust-containing smoke holes pass through the filter layer. Filter type dust collectors include bag type dust collector...

+ Continue reading

Exhaust gas purification applications

Posted on Sun, 12 Sep 2021 04:12:07 +0000

Exhaust gas purification towers generally include acid mist exhaust gas purification tower, FRP exhaust gas purification tower, biological exhaust gas purification tower, PP spray exhaust gas purification tower, etc. Flue gas purification mainly refers to the treatment of industrial waste gas gen...

+ Continue reading

Mixed flow closed cooling tower (downstream closed cooling tower)

Posted on Tue, 17 Aug 2021 13:11:47 +0000

Natural wind enters from two directions. One direction enters from the air inlet on the top of the cooling tower, passes through the cooler and enters the air duct, and the other direction enters from the air inlet grille and enters the air duct through the pre-cooling filler. The wind from all d...

+ Continue reading

Cross flow closed type cooling tower

Posted on Tue, 17 Aug 2021 13:08:47 +0000

Natural wind enters the cooling tower from both sides of the cooling tower, passes through the pre-cooling filler and the cooler on the upper part of the cooler, and flows upward in the middle of the cooling tower. The exhaust system discharges the wind to the top of the cooling tower. The spray ...

+ Continue reading

Countercurrent closed type cooling tower

Posted on Thu, 05 Aug 2021 12:47:31 +0000

Natural wind enters the inside of the cooling tower from the inlet grille, flows upward, and discharges the wind to the top of the cooling tower through the exhaust system. The spray pump sucks water from the water tank, passes through the outer spray pipe to the inner spray device, and sprays it...

+ Continue reading

Hoist and Crane Troubleshooting

Posted on Mon, 28 Jun 2021 13:29:44 +0000

Electrical failure. There are many electrical faults. The most common ones are loose control wires, arcing and burning of contactor contacts, etc. Mechanical failure. Mechanical failures are relatively simple, usually due to aging of mechanical parts, excessive wear, etc., change the failurepart...

+ Continue reading

Famous Crane and hoist company

Posted on Wed, 26 May 2021 13:27:43 +0000

Finland KONECRANES is one of the earliest countries engaged in the crane industry. It has always been a world leader in this field and is also the most creative crane manufacturing company. Finland KONECRANES has established a complete sales and service network in more than 60 countries around ...

+ Continue reading

Difference between Crane and Hoist

Posted on Wed, 26 May 2021 13:22:54 +0000

The electric hoist is an electric hoist, which is monorail when hung on a steel beam, and the crane is framed on two steel beams with double rail. Crane is a kind of lifting equipment. From the structure point of view, there are generally single beams, double beams, portals, and bridges. It can w...

+ Continue reading

Daily maintenance for crane

Posted on Tue, 25 May 2021 12:40:23 +0000

The main contents of daily maintenance for crane and hoist are: First-level maintenance: It is a regular maintenance work, which is responsible by the crane operator, which mainly includes the inspection, lubrication, tightening and adjustment of wire ropes, drums, pulleys, bearings, couplings, r...

+ Continue reading

What’s the reason that CNC bending machine can not be started ?

Posted on Tue, 25 May 2021 12:38:31 +0000

If the CNC bending machine cannot be started, what is the specific reason? If the CNC bending machine cannot be started, the inspection process is similar to that of the CNC shearing machine. As for the specific reasons, there are the following: Reason 1: The power supply used by the CNC bending ...

+ Continue reading