Exhaust gas purification towers generally include acid mist exhaust gas purification tower, FRP exhaust gas purification tower, biological exhaust gas purification tower, PP spray exhaust gas purification tower, etc. Flue gas purification mainly refers to the treatment of industrial waste gas gen...

Natural wind enters from two directions. One direction enters from the air inlet on the top of the cooling tower, passes through the cooler and enters the air duct, and the other direction enters from the air inlet grille and enters the air duct through the pre-cooling filler. The wind from all d...

Natural wind enters the cooling tower from both sides of the cooling tower, passes through the pre-cooling filler and the cooler on the upper part of the cooler, and flows upward in the middle of the cooling tower. The exhaust system discharges the wind to the top of the cooling tower. The spray ...

Natural wind enters the inside of the cooling tower from the inlet grille, flows upward, and discharges the wind to the top of the cooling tower through the exhaust system. The spray pump sucks water from the water tank, passes through the outer spray pipe to the inner spray device, and sprays it...

Electrical failure. There are many electrical faults. The most common ones are loose control wires, arcing and burning of contactor contacts, etc. Mechanical failure. Mechanical failures are relatively simple, usually due to aging of mechanical parts, excessive wear, etc., change the failurepart...

Finland KONECRANES is one of the earliest countries engaged in the crane industry. It has always been a world leader in this field and is also the most creative crane manufacturing company. Finland KONECRANES has established a complete sales and service network in more than 60 countries around ...

The electric hoist is an electric hoist, which is monorail when hung on a steel beam, and the crane is framed on two steel beams with double rail. Crane is a kind of lifting equipment. From the structure point of view, there are generally single beams, double beams, portals, and bridges. It can w...

The main contents of daily maintenance for crane and hoist are: First-level maintenance: It is a regular maintenance work, which is responsible by the crane operator, which mainly includes the inspection, lubrication, tightening and adjustment of wire ropes, drums, pulleys, bearings, couplings, r...

If the CNC bending machine cannot be started, what is the specific reason? If the CNC bending machine cannot be started, the inspection process is similar to that of the CNC shearing machine. As for the specific reasons, there are the following: Reason 1: The power supply used by the CNC bending ...

Lifting machinery is mainly used for loading, unloading and transferring materials, and is the primary equipment for modern production. The use of lifting and transporting machinery can reduce the labor intensity of workers, reduce loading and unloading costs, reduce damage to goods, increase lab...