All Terrain Crane Selection and Procurement Guide

I. What is an All Terrain Crane?

An All Terrain Crane is a high-end mobile lifting device that combines the highway travel capability of a truck crane with the rough-terrain adaptability of an off-road crane. It features a multi-axle, all-wheel drive, and all-wheel steering chassis design, equipped with high-power engines and advanced suspension systems, enabling efficient transfer and operation on highways, muddy sites, deserts, mountains, and other complex terrains.
For high-difficulty lifting projects such as wind power installation, petrochemical construction, bridge construction, and emergency rescue, the all-terrain crane is an irreplaceable core equipment. We offer a full range of products from 25 tons to 1600 tons, supporting customized configurations and global exports.

II. Core Advantages of All Terrain Cranes

Strong Chassis Performance

Multi-axle All-wheel Drive: Configurations such as 8×6, 10×8, and 12×8 provide powerful traction, adapting to mud, sand, and slopes.

All-wheel Steering: Supports crab steering and independent rear-wheel steering, with a minimal turning radius suitable for narrow sites.

Adjustable Oil-Gas Suspension: Adjusts ground clearance based on road conditions, enhancing driving stability and off-road passability.

Excellent Boom Performance

U-shaped or Oval High-strength Steel Main Boom: Reduces weight while maintaining high rigidity.

6 to 9-section Telescopic Boom: Full extension length can reach 80 to 120 meters.

Optional Jibs: Fixed jibs or tower jibs are available to extend working height and radius, suitable for wind power and super-high-rise building scenarios.

Intelligent Safety Control

Load Moment Indicator (LMI): Monitors load moment, angle, and boom length in real-time, automatically alarming and cutting off dangerous operations.

Luffing Compensation and Anti-tilt Control System: Monitors outrigger pressure and vehicle center of gravity.

Remote Information Management System: Supports GPS positioning, operation recording, fault diagnosis, and fleet centralized management.

Rapid Transfer

Some models support self-unloading counterweights and self-laying outrigger pads, allowing single-person on-site deployment.

The whole machine can travel on highways without disassembling the main boom, ready for operation within 15 to 30 minutes of arrival.

III. Typical Application Scenarios

Wind Power Generation: Installation and maintenance of turbine nacelles, blades, and towers; recommended 100 to 1200 tons.

Petrochemical Industry: Lifting of reactors, towers, and large pipelines; recommended 50 to 600 tons.

Bridge Construction: Lifting of prefabricated beams and bridge tower components; recommended 100 to 500 tons.

Mining and Ports: Heavy equipment loading/unloading and container handling; recommended 50 to 300 tons.

Emergency Rescue: Rapid lifting and road clearing in disaster areas; recommended 25 to 100 tons.

General Infrastructure: Lifting of steel structures, workshops, and subway shield machines; recommended 35 to 200 tons.

IV. Why Choose Our All Terrain Cranes?

Independent R&D and Production, Core Control

Independent design of chassis, cab, and control systems.

Core assemblies cooperate with international brands such as Deutz, Weichai, and ZF.

Holds multiple patents for boom structure, hydraulic systems, and safety control.

Full Lifecycle Service

Pre-sales: Free working condition analysis and equipment selection reports.

In-sales: Engineers can be dispatched to guide foundation construction and assembly.

After-sales: 12-month warranty, lifetime parts supply, remote fault diagnosis, and operator training.

Complete International Certifications

Certified by CE (EU), GOST/EAC (Russia & CIS), AS (Australia), ISO9001/14001/45001, etc.

Can assist with local certifications in the destination country (e.g., TÜV, BV, SGS).

Flexible Cooperation Models

Supports whole machine sales (standard or customized), financial leasing (installment/rental), used equipment exchange (trade-in), and separate parts supply.

Perfect Export Logistics

Provides whole machine Ro-Ro shipping, disassembled container/flat rack shipping, full insurance, export customs declaration, and destination port clearance assistance.

V. Selection Advice

When selecting an all-terrain crane, please pay attention to the following parameters:

Maximum Rated Lifting Capacity: Refers to the lifting capacity at the shortest main boom and minimum radius. Actual operations require consulting the load chart based on boom length and radius.

Main Boom Full Extension Length: Determines whether the required working height or distance can be reached.

Chassis Axle Count and Emission Standards: Affects highway driving legality (e.g., Euro V/China VI) and steering flexibility.

Outrigger Span: Larger spans offer better stability but require more site space.

We can provide a free technical selection plan based on your common lifting weight, working radius, site conditions, and transfer frequency.

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.

    Name

    Email

    Phone

    Subject

    Your message (optional)

    News

    All Terrain Crane Selection and Procurement Guide

    Posted on 周六, 09 5 月 2026 02:52:39 +0000

    The Ultimate Guide to Crane Hooks: Safety, Selection, Maintenance & Procurement

    Posted on 周五, 08 5 月 2026 02:29:30 +0000

    Crane Control System: Precision, Safety, and Efficiency Redefined

    Posted on 周四, 07 5 月 2026 03:04:21 +0000

    High-Performance Crane Wheels

    Posted on 周三, 06 5 月 2026 03:43:27 +0000

    Hoist Spare Parts: The Key to Ensuring Efficient Equipment Operation

    Posted on 周四, 30 4 月 2026 02:52:03 +0000

    Crane Spare Parts Procurement Guide: How to Ensure Long-Term and Stable Equipment Operation

    Posted on 周三, 29 4 月 2026 02:11:23 +0000

    Tailor-made Lifting Solutions: Precision Adaptation for Industrial Advancement

    Posted on 周二, 28 4 月 2026 03:04:07 +0000

    Custom Crane Manufacturer: Tailored Efficient Solutions for Your Business

    Posted on 周一, 27 4 月 2026 03:24:18 +0000