Posted on Mon, 31 Oct 2022 14:02:02 +0000
There are many equipment that need to be used for processing air ducts, generally the following are the main ones: Bite machine: Press the metal sheet into a special shape so that the parts can be locked together to form – a strong part that will not separate easily. Folding machine: used ...
Posted on Mon, 31 Oct 2022 13:58:40 +0000
Industrial production will inevitably produce smoke and dust emissions. In the early stage of industrial development, due to the lack of reasonable control of smoke and dust, we are now increasingly polluted. Dust collectors are a type of equipment installed at the end of factory equipment, which...
Posted on Sun, 30 Oct 2022 10:29:14 +0000
The waste tire processing equipment treats waste tires in the following ways: Cut the tire into strips. Tires cut into strips are beneficial for loading and transportation to increase the loading capacity; or for subsequent tire crushing work. Beat the tires into blocks. Scrap tires can be smash...
Posted on Sun, 30 Oct 2022 10:04:00 +0000
A chiller is a type of refrigeration equipment. In air conditioning systems, it is used as an intercooler. The cooling capacity of the chiller is determined by two factors: The first is the heat exchange area of the evaporator (heat exchanger); the second is the heat exchange area or heat exchang...
Posted on Sat, 17 Jul 2021 11:45:07 +0000
Lifting structure The transmission path is as follows: the motor drives the high-speed shaft of the reducer through the high-speed shaft coupling, passes through the reducer and increases the torque, and the low-speed shaft passes through the low-speed shaft coupling to drive the reel. The wire ...
Posted on Fri, 28 May 2021 14:38:03 +0000
The working strength of the jib crane is light. The crane is composed of a column, a slewing arm slewing drive device and an electric hoist. The lower end of the column is fixed on the concrete foundation by anchor bolts. The I-beam of the jib can be used to run left and right in a straight line,...
Posted on Fri, 28 May 2021 14:36:51 +0000
The foundry crane is the main equipment in the steelmaking and continuous casting process. It is mainly used for the converter feeding to the converter and the molten iron; in the refining span, the ladle is hoisted to the refining furnace or the molten steel is hoisted to the continuous casting ...
Posted on Fri, 28 May 2021 14:34:18 +0000
Electrical failure. There are many electrical faults. The most common ones are loose control wires, arcing and burning of contactor contacts, etc. Mechanical failure. Mechanical failures are relatively simple, usually due to aging of mechanical parts, excessive wear, etc., change the failurepart...
Posted on Wed, 26 May 2021 13:25:25 +0000
Datop company mainly deals in and exports electric hoists, single beam cranes, double beam cranes, gantry cranes, bridge cranes, European cranes, road and bridge engineering cranes, shipbuilding gantry cranes, cantilever cranes, electric flat cars, grab buckets and explosion-proof cranes and so o...
Posted on Sat, 10 Oct 2020 09:49:13 +0000
As you often see, what are the commonly used crane types? I will give you a brief introduction today. First of all, according to the crane structure and performance, the cranes on the market can be divided into four categories: Light lifting crane; Bridge crane; Gantry crane; Jig type crane ...