what is Latex Gloves Production Line

Latex gloves are a kind of gloves. They are different from ordinary gloves and are made of latex. It can be used in household, industrial, medical, beauty and other industries and is an essential hand protection product. Latex gloves are made of natural latex and other fine additives. The products have undergone special surface treatment and are comfortable to wear. They are widely used in industrial and agricultural production, medical treatment, and daily life.
The rubber is first sliced ​​by a rubber mixing machine, and then sent to a sol tank to mix the sol with gasoline. The sol is then emulsified and modulated and then pumped to the latex intermediate tank. The rubber solution dissolved in gasoline is fed from the top of the distillation tower and heated and distilled by steam. The light component gasoline is heated into a gas phase. The gasoline gas is mixed and cooled by cold water in the oil-gas cooler. The oil-water mixture then goes to the oil-water separator, where the oil and water are stratified. The upper layer of gasoline is recovered, and the lower water is sent to the cooling tower for cooling through a water pump. After cooling, the gas gasoline in the distillation tower is cooled. The latex in the distillation tower is sent to the latex mixing tank according to its own pressure for mixing and modulation. After modulation, it is sent to the centrifuge to separate the glove raw material latex. After coloring and filtering, it is ready for use. The glove model is first cleaned with acid and alkali and washed with water. The cleaned model is first immersed in hot water and heated, then soaked in coagulant and dried for glue dipping. After dipping, it is sent to the oven for preliminary drying, a fiber inner sleeve is added, hot water is poured, and then sent to the oven for vulcanization and drying to form. After the gloves are demoulded, they are inflated and inspected, set at low temperature, dried at medium temperature, washed, dehydrated, and dried before being packaged and sent to the finished product warehouse.