Industry Dust treatment environment friendly

Filter type dust collector refers to the equipment that realizes gas-solid separation when dust particles in the airflow are intercepted and captured by the filter layer when the dust-containing smoke holes pass through the filter layer. Filter type dust collectors include bag type dust collectors and particle layer dust collectors. The former usually uses filter bags made of organic fibers or inorganic fiber fabrics as the filter layer, while the latter filter layers mostly use particles of different sizes, such as quartz sand, It is composed of river sand, ceramsite, slag, etc. As the powder repeatedly adheres to the outer surface of the filter bag, the powder layer continues to thicken, and the resistance value of the bag filter also increases; the pulse valve diaphragm sends a command, and the pulse valve opens when the left and right flooding occurs, and the high pressure air bag compresses If the air is ventilated, if there is no dust or it is small enough, the mechanical dust removal work will stop working.

Applicable industry

Petroleum and chemicals (such as plastics, rubber, synthetic fibers, organic chemicals); paint production and spray painting; printing (including iron printing, printing paper, and printing plastics); electronic components and wires; pesticides and dyes; medicine; picture tubes, films, tapes, etc. .

Technical advantages

1. High dust removal efficiency, can capture dust above 0.3nm, so that the dust-containing gas can be purified to 20mg/m3 or less.

2. Less auxiliary equipment, less investment, and technical requirements not as high as electric precipitators.

3. It can collect dust that is difficult to recover by electrostatic precipitator; and to a certain extent, it can collect nitrate, sulfide and other compounds.

4. Good adaptability to load changes, especially suitable for capturing fine and dry dust, and the collected dry dust is easy to process and recycle.

5. The bag filter is safer when collecting dusty gas with explosion hazard or sparks.

Contact us

If possible, kindly suggest please your working industry/process, working pressure, working medium, etc. Given detailed request helps to gain better-matched customized solution. Thanks for your patience.

your request will be responsed within 3 hours, kindly pay attention to your email please.


The use of diesel generators

Posted on Fri, 17 Feb 2023 23:40:13 +0000

Classification of wire and cable

Posted on Fri, 17 Feb 2023 23:39:16 +0000

Bending machine operation steps

Posted on Fri, 17 Feb 2023 23:37:19 +0000

Industry Dust treatment environment friendly

Posted on Sun, 06 Nov 2022 10:16:30 +0000

How about investing in a waste tire processing line?

Posted on Sat, 09 Jul 2022 00:36:32 +0000

The structure and use of the cantilever crane

Posted on Thu, 24 Mar 2022 01:23:53 +0000

Why choose European cranes

Posted on Wed, 16 Mar 2022 08:14:24 +0000

How to install a single girder crane

Posted on Mon, 14 Mar 2022 08:43:04 +0000